A shaking water bath is used for mixing and agitating samples in a water bath under controlled temperature. Compared to other types of incubators, water baths transfer heat more quickly and effectively. Moreover, heat loss can also be minimised even when the enclosure of the incubator stays open. Therefore, the equipment is ideal for all those applications that require quick incubation with minimal temperature changes.
The water bath shaker is the right choice for moving liquids as they come with the shaking control. With continued shaking, the liquid-grown cells mix with air and the heating element stays submerged in water and maintains the temperature at a constant range.
What are the uses of water baths?
What is the purpose of using water baths in laboratories? Well, the primary usage of the equipment is heating the samples in a laboratory. The samples containing flammable chemicals when heated in an open flame are exposed to risks of combustion.
Water bath shaker are appropriate for moving the samples and keeping them in consistent motion during the heating stage. A majority of these devices are ideal for heating samples that stay at a temperature between five to ninety-nine degrees Celsius. For heating anything beyond 100 degrees Celsius, sand or silicone bath is ideal.
How does the water bath work?
You are familiar with the shaking bath and how it maintains temperature consistency when samples are heated but here is how exactly the device functions:
· The equipment has a temperature sensor which transfers the temperature of the water to the resistance value
· The control signal or the output regulates the heat power in an efficient manner for the heating tube
While performing these functions, the temperature in the water bath stays constant.
Tips to set up the water bath
Before heating the samples, you need to prepare the water bath adequately so that it functions appropriately to meet your needs. Here is how you need to set up the water bath:
· When preparing the laboratory shaker, you need to fill it up with distilled water to the desired level
· Once the container is filled, you can switch the device on and set the temperature on the temperature controller
· Allow the water to reach the desired temperature level and the time take will depend on how much is your desired level of heat
· Use a thermometer to measure the temperature of the water and if it is at the desired level, you can then start working with the water bath
Things to keep in mind when using the water bath
Using the water bath shaker is easy. All you can do is follow the lab equipment guide at first to get surer about the mechanism. That way, you can prevent damaging the samples or compromise their integrity. Read below to understand the basic steps you need to follow when using shaking water baths:
· Keep the surrounding area clean and dry
· Plug the device to a power supply
· Check the temperature of the water and ensure that it reaches the desired level and cover the heating element
· Switch on the device and set the temperature control to the desired level
· Wait for the thermostat to attain enough heat
· As soon as the heating mechanism begins, insert the samples inside carefully while the temperature sensor maintains regulate the temperature when the device is in use
· After using the water bath, you need to remove the samples and switch off the device
Summarising shaking water bath
Here is the synopsis of shaking water bath:
· It allows samples to shake continuously for long time under controlled temperature conditions due to precisely-controlled shaking features
· Due to continuous shaking, the liquid grown cell culture mixes with the air and boosts cell growth
· Temperature can be easily adjusted due to the high-precision control
· The flask holding clamps act as accessories and gabled lid prevents the condensate to drip on to the sample directly
· The other features include a user-friendly keypad for easy operation and streamlined bath drains
Water bath uses
What are the major water bath uses? Read below to know more:
1. It helps in improving the solubility of substances that are not easily soluble
2. It is used for melting substances and heating the laboratory reagents
3. The device is used for heating flammable substances that might be exposed to combustion in open flame
4. It is extensively used for cell culture in laboratories
Every standard laboratory is equipped with water bath and they are not only used for heating samples but perform so many other options. So, if you need to get one to fulfil your needs, connect with IGene Labserve, one of the leading laboratory equipment manufacturers. Explore the equipment here https://www.igenels.com/ before you buy.
No comments:
Post a Comment